top of page
Search

What Makes Dual Occupancy Home Designs Work in Melbourne?

Writer: xpressbuliding20
xpressbuliding20
Oct 15
4 min read

Two homes on one block. That is the idea behind dual occupancy. As land gets tighter, more Melbourne owners and investors are looking at it. Good dual occupancy home designs start with the land. They then follow the rules of the local council. This guide explains how the process works, what the plans must show and where projects often run into trouble.


What is dual occupancy and how does it work in Melbourne?

Dual occupancy refers to two houses being built on one single block of land. Some people may also refer to it as a duplex, multi housing site, or side by side housing development. These houses may either be located side by side or one behind the other.

Dual occupancy Melbourne projects follow state rules and each council’s planning scheme. Duplex design Melbourne projects fall under the same rules. Two blocks of the same size can get very different results.

What do dual occupancy house plans need to show?

Councils want clear complete drawings. A typical set of dual occupancy house plans covers:

  • Site analysis and a description of the land

  • Site layout and elevations

  • Shadow diagrams

  • A ResCode report

  • Floor plans for each home

  • 3D renders where they help explain the design

Dual occupancy floor plans show where rooms sit, where light enters, and how people move through each home. Shadow diagrams show how the new homes affect nearby yards at certain hours. ResCode is Victoria’s set of residential design standards, and the report checks the design against them. A thin set of drawings invites questions. Questions slow an application down.

Why does the block matter before any drawing starts?

It is very crucial to note that all designs begin from the land. The dimensions, shape, gradient, street frontage and the buildings around will determine what can be designed. Some clients would prefer to first learn the lot arrangement before making the purchase. From the preliminary investigation, what will be feasible on the block in line with the regulations will become apparent. This makes it possible for the client to understand that what appears to be large is not feasible.

In case of difficult blocks, one could be required to design a dramatic car turning around such that cars leave the block directly.

What is the difference between a planning permit, a building permit and subdivision?

These three processes tend to be confused.

  • Planning permit. The design is approved by the council. This requires application, plans, and reports. Timing is subject to the council.

  • Building permit. This comes before any works. It requires construction plans that conform to the Building Code, including energy ratings, structural considerations, and soil tests.

  • Subdivision. This divides the site into individual lots via the Title Office process, operating independently of the other two processes.

Townhouses subdivision Melbourne developments follow a similar line of thought. Property owners who wish to keep each house on an individual title need to consider subdivision from the beginning.

Can a good design change what a site can hold?

Sometimes it can. One site in a Melbourne growth zone began with a plan for ten townhouses on 1,346 sqm. The designers felt the land could hold more. They worked with the council’s urban designers, traffic engineers, arborists, and planners. Twelve townhouses received approval. Multi unit designs like this depend on close work with every council department.

Another case began with a refusal. A dual occupancy application failed at council, and again at VCAT, under a previous designer. A new team kept the owner on every council call and meeting. They answered the council’s concerns using ResCode. A planning permit followed in six months. The two townhouses were built and later sold, setting a local record.

Results like these depend on the site, the zoning and the council. They are never certain.

Who should be on the project team?

Every project requires several positions to be filled. The building designers Melbourne homeowners appoint should be licensed building practitioners at the Victorian Building Authority. They will create drawings and communicate with the council. Drafting services Melbourne will make construction drawings based on approved plans. Builders for dual occupancy will do the work on the ground.

Sometimes homeowners require rough construction quotations from reliable builders while designing. It will check the budget at the initial stage before the finalizing of plans. Construction drawing and building design services may include that.


Could a rooming house suit the block instead?

Occasionally yes. A Residential 1B rooming house holds up to 12 occupants. It has a maximum floor area of 300 sqm and needs two parking spaces. When it follows the rooming house regulations, a planning permit is not needed in most cases. A building permit alone may be enough, and construction can start in as little as six weeks.

Rooming house Melbourne projects serve a different goal from dual occupancy. The two are worth comparing before design work begins.

FAQs

What is a dual occupancy?

 Two homes on one block also called a duplex or side by side development.

Do dual occupancy homes need a planning permit?

 In most cases yes with council approval first and a building permit before construction starts.

Does subdivision come under dual occupancy?

No, subdivision is an independent procedure that creates individual titles, independent of planning and construction approvals.

How long does it take for council approval?

It varies from one council to another and even with the site; therefore, it varies from one project to another.

Is it possible to draw plans before purchasing land?

Yes a plot plan can depict what will fit on the land even before the purchase.

Conclusion

Drawing must come after planning in the case of dual occupancy. There are constraints in the block. It is the council that provides the guidelines. Planning and drawing fill the gap. It is highly probable that those who look at the land first, draw plans for themselves and understand the differences between planning, building, and subdivision will not be surprised by anything. Proper planning can make dual occupancy feasible.


 
 
 

Recent Posts

See All

Comments


Subscribe here to get my latest posts

© 2035 by The Book Lover. Powered and secured by Wix

  • Facebook
  • Twitter
bottom of page